dress for less store What's that? A new is bringing discounts to the Ann Arbor area Ross details 2025 store expansion

Thank you for this amazing dress

Matching lace applique flows past the waist of this radiant long gown and onto the long satin skirt that flows to the floor in a flattering a-line shape

As you may remember from my previous post, this was the dresser as she started out: Tools You Will Need: Chisel Mallet Circular saw Measuring tape Pocket hole jig Hammer (or cordless brad nailer) Cordless drill Level 1/16 Drill bit Wood clamps Supplies You Will Need: -1/2 plywood (I used a 1/4 sheet for all 3 drawers that is 2 x 4) 1 pocket hole screws (8 for each drawer) 1 nails 24 scrap to cut wood shims -Ball-bearing metal drawer slides (buy the length as the depth of the drawers 12 long ones are found at WoodCraft and Amazon) -13 boards cut to drawer depth (I used about 6 on this dresser) -1 wood screws (for attaching to drawer face) -1 1/2 wood screws (for attaching 1x3s to side of dresser) Step 1: Remove Old Drawer Slides Using a chisel and mallet remove the old wooden drawer slides from the inside of the dresser

A pump is probably best